SP100 Flat Grey Primer VHT FlameProof Coating

VHT FlameProof Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT FlameProof Coating will withstand temperatures up to 2000В°F (1093В°C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.

Temperature: 1300В°F-2000В°F (704В°C-1093В°C)

Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads

Finish: Flat

Dry Time: Curing time required and can be done on or off vehicle (see below)

Curing FlameProofв„ў

VHT FlameProofв„ў Coating only attains its unique properties after correct curing (refer to instructions on the can).

On the Vehicle

• Paint must be completely dry before curing
• Run at idle for 10 minutes
• Cool for 20 minutes
• Run at idle for 20 minutes
• Cool for 20 minutes
• Run under normal operating conditions for 30 minutes

Off the Vehicle

• Paint must be completely dry before curing
• Heat to 250В°F (121В°C) for 30 minutes
• Cool for 30 minutes
• Heat to 400В°F (204В°C) for 30 minutes
• Cool for 30 minutes
• Heat to 650В°F (343В°C ) for 30 minutes

Caution: Do not exceed the temperature of the least heat tolerant component or the base metal

Coating System

VHT provides a multi-high performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.