Your Cart (0)
Thumbnail Filmstrip of Ridgid 50767 258 2-1/2-8 inch Pipe Cutter Images
21‚ÅÑ2" to 8" Diameter Pipe
The RIDGID Model 258 Power Pipe Cutter cuts 21‚ÅÑ2" to 8" schedule 10*/40
steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop.
Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement
cutter that provides square cuts. The operator controls the feeding rate
by pumping the hydraulic foot pump throughout the operation. A square
cut with minimal burr on either 21' or nipple lengths of pipe is achieved
quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID
Pipe Roller for Beveling can be used to rotate the pipe while a second
operator uses a grinder to bevel the pipe. Some of the 258 advantages are:
• Square cut 21' or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open flame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for field or shop use.
• Adaptable for beveling.
Specifications
• Cutting Capacity: Model 258 21/2" to 8" schedule.
• 10*/40 steel pipe.
• Model 700 Power Drive.
• Power Drive RPM: 33 (no load).
• Weight: 105 lbs. (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment
• One (1) RIDGID 774 Square Drive Adapter.
• One (1) 81/2" HD Cutter Wheel Assembly.
• One (1) Hydraulic Ram and Foot Pump.
• Two (2) 21/2" to 12" Ball Transfer Pipe Supports.
*Use the thin cutter wheel for best results.
**Cutting time varies with pipe schedule and diameter.
Note: Models 258 and 258XL are not recommended to cut cast iron pipe.
For optimum wheel life always properly support the work piece with
pipe supports. (See pages 2.2 to 2.5)
Request a quote for this product
Thank you! We’ll review your request within 24hrs. Your selected products will be saved in your account.
Not logged in?
Sign In or
Create an Account
to save your quote request details.