Sign In CONTACT US ORDER STATUS
800-222-5411
0
Product Search
    0
    Secure Checkout
    Ridgid 48462 Gas Sectional Machine Model K-1500G

    Thumbnail Filmstrip of Ridgid 48462 Gas Sectional Machine Model K-1500G Images

      Purchase Ridgid 48462 Gas Sectional Machine Model K-1500G

      RIDGID
      SKU: 95691484628 Ridgid 48462 Gas Sectional Machine Model K-1500G

      Shipping Weight: 432.60 lbs
      $7,354.20
      Gas Sectional Machine for 2 inch to 10 inch Drain/Sewer Lines Model K-1500G Machine with Standard Equipment, includes: ÔøΩ Ten Sections Of C-14 Cable, Total 150 Feet (45,7 m) ÔøΩ Three A-8 Cable Carriers ÔøΩ A-1 Left -Hand Ridgid Drain Cleaning Mitt ÔøΩ A-12 Coupling Pin Key ÔøΩ A-34-12 Rear Guide Hose ÔøΩ A-2864 Hex Key ÔøΩ A-3516 Hex Key ÔøΩ A-3 Tool Box ÔøΩ T-2 Heavy-Duty Straight Auger ÔøΩ T-4 Heavy-Duty Funnel Auger ÔøΩ T-6 Retrieving Auger ÔøΩ T-8 Grease Cutter ÔøΩ T-13 Sawtooth Cutter ÔøΩ T-50 Sharktooth Cutter
       
      or

      RIDGID 48462 Model K-1500G

      Gas Sectional Machine for 2" to 10" Drain/Sewer Lines. Machine with Standard Equipment, includes: – Ten Sections Of C-14 Cable, Total 150 Feet (45,7 m) – Three A-8 Cable Carriers – A-1 Left-Hand RIDGID Drain Cleaning Mitt – A-12 Coupling Pin Key – A-34-12 Rear Guide Hose – A-2864 Hex Key – A-3516 Hex Key – A-3 Tool Box – T-2 Heavy-Duty Straight Auger – T-4 Heavy-Duty Funnel Auger – T-6 Retrieving Auger – T-8 Grease Cutter – T-13 Sawtooth Cutter – T-50 Sharktooth Cutter

      For 2" to 10" (50-250 mm) Drain/Sewer Lines

      • Features:
      • A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
      • Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Pull down on the handle and the cable spins at 600 RPM. Release handle, cable stops instantly
      • Comes equipped to use 1 1⁄4" (32 mm) cable to clean 3" (75 mm) to 10" (250 mm) lines through 300 feet (92 m).
      • 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
      • Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
      • Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.