1-800-222-5411
We Accept International Orders Using 3D SECURE
1-800-222-5411
ORS 32012 Metric Tapered Roller Bearing 60mm Bore and 95mm OD
ORS 32012 Metric Tapered Roller Bearing 60mm Bore and 95mm OD
Image may not represent actual item. Refer to descriptions & specs for all details
SKU: ORS-32012

ORS 32012 Metric Tapered Roller Bearing 60mm Bore and 95mm OD

Weight: 1 lbs 10 ozs
Price: $31.13
Add to Cart & Click Here For Shipping Estimate
32012 Metric Tapered Roller Bearing 60mm x 95mm x 23mm with a x 23mm cone width x 17.5mm cup width and max grease speed of 3600 rpm
Product Specifications
Product Details

32012 Metric Tapered Roller Bearing

32012 Metric Tapered Roller Bearing 60mm bore x 95mm outside diameter x 23mm width x 23mm cone width x 17.5mm cup width and max grease speed of 3600 rpm

Tapered roller bearings are classified as metric and inch series. Inch series tapered roller bearings have a special coding. Metric series bearings include 30000, 31000, 32000, and 33000 series and special size bearings. Tapered roller bearings can be disassembled. Line contact between rings and rollers are modified to make sure raceway forms have a crown on them so that the shoulder stresses are minimized. Tapered roller bearings can hold axial loads from only one side. Therefore, they need to be assembled with another bearing. The bearing is chosen based on the radial load ratings. These bearings should be close to its counterpart bearing as the changes in shaft temperature affects the bearing internal clearance. The internal clearance of the bearing should be chosen based on the counterpart bearing.

Specifications
Assembled Width (mm):  23
Bore Diameter (mm):  60
Cone Width (mm):  23
Cup Width (mm):  17.5
Dynamic Load (kN):  83.91
Max Speed/Grease (rpm):  3600
Outside Diameter (mm):  95
Static Load (kN):  124.83
MPN:  32012
Product Reviews
Rate this product:  1   2   3   4   5