Megadyne 2080-8M-25 HTB Synchronous Belt

The standard trapezoidal tooth timing belt design performs poorly in high-torque applications and high-power drives at lower speeds.  To overcome this disadvantage, the High-Torque Belt (HTB®) was developed using a more efficient tooth profile.

Among the advantages are:

• Higher torque transmission at low speeds

• High power transmission over a wide speed range

• Improved meshing to reduce tooth jump

• Higher resistance to tooth shear

• Less tooth wear due to friction

Non-standard lengths in 5mm, 8mm and 14mm pitch are also available, as are belts with 3mm pitch. 

3M – 3mm HTB® Synchronous Belts

Many lengths are in stock and can be cut to the desired width.  Additional 3mm pitch HTB® Belt sizes are available on a made-to-order basis.  Please check with Jason/Megadyne for availability.  HTB® Synchronous Belts are specified by belt pitch length, tooth pitch and belt width in millimeters.  Example: 720-8M-30

Features & Benefits

•Fiberglass Tensile Cord – High dimensional stability and maximum flexibility

•Chloroprene Belt Body – Oil, heat and ozone resistance; high tooth shear resistance

•Nylon Tooth Cover – Durability and wear resistance, increased power capacity

Construction

Compound – Chloroprene

Cord – Fiberglass