Ridgid 25638 Roll Groover

The RIDGID 960 Roll Groover is a ratchet-driven, portable roll groover for field applications. With a cast in carrying handle, the 960 Roll Groover is easier to move around the jobsite than any other roll groover of its kind. The 960 Roll Groover mounts on the RIDGID 300-Power Drive for convenient grooving of steel and copper pipe. The 960 can be actuated by either a 1/2" drive ratchet or any wrench that fits the 15/16" hex on the feedscrew.

Features Ability to groove 6" schedule 10 and 40 steel pipe with 17% less torque than the competition. Grooving capacity of 1" to 6" Schedule 10 and 40 steel pipe, 2" – 6" Copper Tube Type K, L, M, and DWV. Convenient carrying handle for easy portability. Permanently affixed depth setting gauge that will not fall off or get tangled during operation. Heat-treated feed screw bushing for added durability. Quick change-out rollset design allows easy transformation to roll groove 1" steel or 2"-6" copper tubing. Feedscrew can be actuated by using either the standard 15"-long ratchet or any 15/16" hex.

Specifications Pipe Capacity: 1" to 6" Schedule 10 and Schedule 40 Steel Pipe 2" – 6" O.D., Copper Tube (Type K, L, M, and DWV), 1" Schedule 10 and 40. Depth Adjustment: Adjusting screw with integral depth setting gauge. Actuation: Feed screw with 1/2" ratchet wrench or 15/16" (Included) hex wrench. Power Drive Mounting: RIDGID 300 Power Drive 38/57 RPM. Weight: 24 lbs. (10.9 kg) including ratchet.

Standard Equipment 15" long ratchet 1/2" drive. Roll Set to groove 1 1/4"-6" schedule 10 or schedule 40 steel pipe.