Gates 6.50X2.75-IDL-FLAT

Idlers are used to take-up extra belt length and provide adjustment for tensioning belt drives. Idler pulleys and sprockets can alter belt paths and clear obstructions. Idler sprockets, flat idlers and idler bushings contain sealed ball bearings and an integral shaft for mounting to adjustable idler brackets. Lubrication and maintenance are not required. Idler assembly may consist of: idler sprocket and bracket, flat idler and bracket, standard sheave or sprocket used with an idler bearing and idler bracket

Markets and Applications
Recommended for drives with limited take-up or no center distance adjustment. Idlers may remain in a fixed location or may be adjustable to allow belt pre-tension take-up.

• Idler sprockets, flat idlers and idler bushings contain sealed ball bearings and an integral shaft for mounting to adjustable idler brackets.
• Lubrication and maintenance are not required.
• Idler assembly may consist of: idler sprocket and bracket, flat idler and bracket, standard sheave or sprocket used with an idler bearing and idler bracket.

Specifications

• Pitch: 14mm
• Width: Up to 55mm
• Use with v-belt: 2-3 Strand B/BX
• Outside Diameter (in): 6.5
• Face Width (in): 2.75
• A (in): 2
• B (in): 1.5
• C (in): 0.13
• D (in): 2.1
• E (in): 5.69
• Thread Size: 1-14
• Bearing: 6308